Image · Nano Banana 2.1
A freestanding wall-style equipment stand made from a tall…
A freestanding wall-style equipment stand made from a tall upright rectangular plate with softly rounded corners, in brushed raw steel with fine grain lines and a quiet satin shine, on two small angled steel feet at the back which support the rolled mat in a smoothly cutout section of the support legs, with machined brushed steel holding fixtures that cradle each piece of deep matte red textured rubber weighted pilates equipment (a long wavy bar, a large round ball disc, two short capsule weights, a ring with two small weight blocks) and pass through the plate, fastened invisibly at the rear, so the front stays clean.. A single freestanding pilates equipment stand, whole and centred, filling about 70% of the frame, in a three-quarter view from slightly above. A tall upright rectangular plate with softly rounded corners, in brushed raw steel with fine grain lines and a quiet satin shine, leans on two angled steel supporting legs attached to the rear, with curved cutout sections whihc support the rolled mat. The front is clean, with no visible fasteners. Brushed steel holding fixtures cradle each piece of deep matte red textured rubber equipment, laid out as in the reference: a long wavy bar down the left side, a large round ball disc at upper right, two short capsule weights below it, and at the bottom a ring holding two small weight blocks. Keep the red pieces solid and slightly thick. Plain light grey seamless background, soft even light, only a faint contact shadow. No text, logos, props, hands, cropping, motion blur or depth of field.
David Briscoe@davidbriscoe0898- Model
- Nano Banana 2.1
- Made by
- David Briscoe
- Shared
- Likes
- 0
Use its prompt, turn it into a video or a 3D model, or find more like it in Fil. Fil is invite-only for now: without an invitation, Open in Fil shows the waitlist.
